Overview
Application & process role
The PC ordinary hammer crusher is separated from heavy hammer crusher and European reversible fine crusher because its capacity range, material boundary and spare parts are different.
It is best used for medium-hard and brittle materials where a simple low-cost one-stage crushing process is more important than premium hard-rock wear life.
Configuration
Series and configuration groups
PC Ordinary Hammer Crusher
Ordinary single-stage hammer crusher family for suitable medium-hard and brittle material crushing.
Ask about this series
Selection Note
Model range notes
Standard PC models are shown separately from heavy hammer crusher and European reversible fine crusher, and their wear parts should not be mixed.
Display Logic
Website structure
Displayed separately from heavy hammer crusher and European reversible fine crusher because the applications, capacity range and spare parts are different.
Series Boundary
How buyers should choose this equipment type
PC ordinary hammer crusher
Low-cost one-stage crusher for limestone, coal, shale, gypsum, brick, concrete block and medium-hard weathered ore.
Material boundary
Not suitable for high-hardness granite, basalt, iron ore and other high-compressive hard rock where wear cost is very high.
Process boundary
Suitable for small aggregate plants, cement raw material crushing, coal processing, construction-waste primary crushing and small washing-line fine crushing.
Selection Boundary
Ordinary Hammer Crusher Selection Boundary
Lower-cost medium and fine crushing option for small soft-stone lines.
Ordinary hammer crusher
Used for small and medium soft-material crushing where low investment and simple layout matter more than premium aggregate shape.
Choose when
- Material is relatively soft, such as limestone, shale, weathered stone, coal gangue or brick-type construction waste.
- Budget is limited and the line needs one machine to complete coarse and fine crushing for simple output.
- Feed size is within about 300 mm and the target capacity is a small line, roughly 20-80 t/h.
- Aggregate grading requirement is not strict, such as subbase material or backfill stone.
- The site is small and a multi-stage crushing line is not required.
Not suitable when
- High-hardness granite, pebble or basalt will wear hammer heads quickly and raise maintenance cost.
- High-mud wet material can paste the grate bars and cause blocking.
- Premium standard construction sand or high-strength aggregate usually needs better shaping.
- Large continuous production lines around or above 100 t/h are normally better matched with other crushing structures.
Advantages
Core advantages
- Simple structure, lower machine cost and compact footprint for low-cost small production lines
- Large crushing ratio can support one-stage crushing when the material is suitable
- Adjustable grate gap supports different discharge size requirements
- Sealed machine structure helps reduce dust leakage according to selected configuration
- Lightweight body can be matched with a mobile frame for mobile crushing layouts
- Wear parts can be replaced conveniently to reduce maintenance downtime
Limits
Operating limits
- Not suitable for high-hardness granite, basalt or iron ore.
- High-clay and high-moisture lump material can block the grate area.
- Not used for large premium aggregate lines where particle shape and wear cost are critical.
Model / Size Data
PC ordinary hammer crusher model reference
Tables show common size ranges. Final configuration is checked by material hardness, mud and moisture, capacity, product size, upstream / downstream equipment and site layout.
The PC series is for suitable medium-hard and brittle materials. It is not recommended for high-hardness granite, basalt or iron ore because hammer and liner wear will be very high.
| Max feed size | Discharge size range | Capacity | Motor power | Weight | Overall dimensions L x W x H |
| PC400x300 |
<=200 mm | 0-25 mm | 5-10 t/h | 11 kW | 0.80 t | 900 x 670 x 860 mm |
| PC600x400 |
<=250 mm | 0-30 mm | 10-22 t/h | 22 kW | 2.26 t | 1200 x 1050 x 1200 mm |
| PC800x600 |
<=250 mm | 0-35 mm | 18-40 t/h | 55 kW | 4.80 t | 1310 x 1180 x 1310 mm |
| PC1000x800 |
<=350 mm | 0-35 mm | 25-50 t/h | 75 kW | 5.90 t | 1600 x 1390 x 1575 mm |
| PC1000x1000 |
<=350 mm | 0-38 mm | 30-55 t/h | 90 kW | 8.00 t | 1800 x 1590 x 1775 mm |
| PC1200x1000 |
<=400 mm | 0-40 mm | 45-80 t/h | 132 kW | 12.6 t | 2360 x 1780 x 1960 mm |
| PC1400x1200 |
<=450 mm | 0-45 mm | 70-120 t/h | 160 kW | 18.5 t | 2750 x 2100 x 2320 mm |
| PC1600x1600 |
<=500 mm | 0-50 mm | 110-180 t/h | 220 kW | 29.8 t | 3380 x 2650 x 2870 mm |
Common Data
Common PC hammer crusher notes
These notes apply to PC ordinary hammer crusher models.
- Position: low-cost one-stage crushing for suitable medium-hard and brittle materials.
- Suitable lines: small aggregate plant, cement raw material crushing, coal processing, construction-waste primary crushing and small washing-line fine crushing.
- Boundary: PC wear parts are not interchangeable with heavy hammer crusher or European reversible fine crusher parts.
- Discharge size is adjusted by grate gap and should be confirmed with material moisture and screen clogging risk.
Applications
Suitable materials and scenarios
Suitable materials
- Limestone, shale, gypsum, coal, weathered soft rock, red brick, blue brick, concrete blocks and soft construction-waste mixtures.
- Only suitable for low-hardness and low-abrasion materials.
Suitable scenarios
- Small aggregate fine crushing.
- Cement raw material crushing.
- Coal processing.
- Jobsite backfill material processing.
- Small construction-waste fine crushing.
Not suitable conditions
- High-hardness rock such as granite and basalt.
- High-mud, high-moisture or lumpy sticky material.
- Large-capacity, high-standard aggregate production where flaky content and wear cost are critical.
Common matching lines
- Small simple aggregate production line.
- Coal crushing production line.
- Small construction-waste treatment line.
- Cement raw material pretreatment line.
Line Position
Process role
Used for one-stage size reduction in small and medium lines when the material is medium-hard, brittle and suitable for hammer crushing.
Material
Material check
Suitable materials include limestone, coal, shale, gypsum, construction-waste concrete blocks, brick and tile, and medium-hard weathered ore. High-hardness granite, basalt, iron ore and other hard rock are not recommended; heavy hammer crusher or cone crusher should be considered instead.
Inquiry
Information to send
- Raw material type, hardness and moisture
- Maximum feeding size
- Required discharge size
- Target hourly capacity
- Whether one-stage crushing is required
- Whether a mobile frame is required
Selection
System parameters
- Raw material type and hardness
- Maximum feeding size
- Required discharge size
- Target hourly capacity
- Moisture and stickiness
- Mobile frame requirement
Parts
Wear parts & spares for this equipment
PC hammer crusher wear parts
- High-manganese hammer head
- Liner plate
- Grate bar
PC rotating and transmission parts
- Main shaft
- Hammer pin
- Flywheel
- Bearing housing
PC adjustment and sealing parts
- Adjustment liner block
- Dust cover
- Sealing strip
Ask for matched parts
Matching
Related equipment
- Vibrating feeder
- Vibrating screen
- Belt conveyor
- PC hammer crusher parts
Related Links
Related equipment
Selection Summary
Quick Equipment Selection Summary
- Large hard-rock raw stone first-stage crushing: choose a jaw crusher.
- Small soft-stone one-machine crushing: choose an ordinary hammer crusher.
- Medium-hard limestone or bluestone, simplified one-machine crushing: choose a heavy hammer crusher.
- Pebble, granite and hard-rock premium aggregate: choose a cone crusher after primary crushing.
- High-mud wet material and mud-stone separation before washing: choose a WLGSX trommel screen.
- Dry aggregate precision grading or finished sand dewatering: choose a vibrating screen.
- Clay-wrapped stone and deep desliming: choose an XSJ drum stone washer.
- Low-mud clean sand with simple washing needs: choose a wheel sand washer.
- Fine sand recovery, lower finished-sand moisture and integrated wet washing: choose the SHY three-in-one sand washing machine.
